Wotofo Profile RDTA
$38.47 AUD discounted from $54.95 AUD
Hurry! Only 14 left at this price!
This variant is currently sold out.
The next evolution in the glorious Profile series has arrived: introducing the Wotofo Profile RDTA! It's been a while since we've had a proper RDTA in, and this one's staggering 6.2mm capacity coupled with a respectable 25mm diameter ticks some good boxes already.
The Profile RDTA legitimately does it all. First, it's an RDTA fed by Stainless Steel wicks to avoid too much cotton wicking, and you can install both mesh AND traditional coils in there! Single mesh pieces from the Wotofo nexMesh for the Profile 1.5 RDA product and up to two traditional coils at a time (3mm inner diameter or less recommended per coil), an infinite world of options awaits.
Diving deeper into the RDTA, the fill port sits just below the deck slots, easily accessible by lifting off the top cap. Since there's a pressure valve opposite the port, it'll fill up with little to no bubbling at all giving you a true capacity of 6.2ml! It also introduces a new nexMesh option in Clapton, a truly trippy piece made of strands of claptonised wire for exceptional surface area that'll equal exceptional flavour.
Not only are you getting an RDTA, this baby is modular so you can twist it apart and use it in RDA mode that's FULLY squonk compatible! We weren't joking, it does it all, even peak style with Wotofo's custom decor metal ringed resin 810 drip tips looking the bees knees.
The whole thing has amazing honeycomb airflow, ensuring those small pin holes condense the air just where it needs to be across your coils or mesh. Along with the RDTA, the amount of accessories you'll get with a Profile RDTA is immense: dual traditional coils, three nexMesh pieces, wick for each of them, a coil and a mesh tool and more! You'll be set for ages right out of the box of one of these.
We'll be struggling to get a Profile on one of these super versatile atties quickly. Get yours today!
- Size: 25 x 52.7mm (not including 510 connection pin)
- Drip Tip Size: 810
- Capacity: 6.2ml
- Supports both single mesh 'coils' (pieces) plus single or dual traditional coils
- Compatible with up to 3mm diameter coils in dual coil mode
- Fully compatible with Wotofo nexMesh for the Profile 1.5 RDA
- Fillable via top cap and automatically feeds juice via stainless steel wicks
- Much less wicking required than traditional RDTAs!
- Brand new claptonised mesh pieces for truly amazing flavour and even contact area all round
- RDA is modular to the RDTA section, and can be squonked in RDA mode
- Three stage adjustable dotted honeycomb airflow
What's in the box:
- 1 x Wotofo Profile RDTA
- 1 x piece of nexMESH Piece Clapton Ni80 + KA1 0.2 ohm
- 1 x piece of nexMESH Extreme KA1 0.16 ohm
- 1 x piece of nexMESH Turbo KA1 0.13 ohm
- 2 x Framed Staple Clapton Coils Ni80 0.33 ohm (per piece, ~0.16 ohm dual)
- 2 x 6mm Diameter Cotton Strips (for mesh pieces)
- 2 x 3mm Diameter Cotton Strips (for traditional coils)
- 6 x Stainless Steel Wicks: 4 pre-installed, 2 spares
- 1 x Coil Trimming Tool
- 1 x Mesh Bending Tool
- 1 x RDA Adapter
- 1 x Cross Head Screwdriver Allen Key
- Spares Bag: o-rings, screws
- User Manual