Vaping Bogan x Suicide Mods x Orca Vape Stubby AIO Kit

FREE EXPRESS SHIPPING

Suicide Mods

$131.97 AUD   discounted from $219.95 AUD

Hurry! Only 0 left at this price!

  • Vaping Bogan x Suicide Mods x Orca Vape Stubby AIO Kit
  • Vaping Bogan x Suicide Mods x Orca Vape Stubby AIO Kit
  • Vaping Bogan x Suicide Mods x Orca Vape Stubby AIO Kit

Accessories for the Vaping Bogan x Suicide Mods x Orca Vape Stubby AIO Kit

This product requires ONE 18650 battery

This variant is currently sold out.


Mel's Pick

What's not to love about this device? It's a marriage between 3 fantastic brands known for their high-quality products, one of which is run by a fellow Aussie. The level of research and design that has gone into the stubby AIO is evident in the high quality of this device, excellent build, incredible looks, and superb flavour. Do yourself a favour and grab a Stubby AIO!

The Suicide Mods Stubby AIO Is the latest project to come from the mind of Vaping Bogan! Brought to us in collaboration with Suicide Mods and Orca Vape, this unique device is designed for vapers of all levels of experience!


With form and function in mind - this unique device utilises a proprietary wire free chipset which makes maintenance a breeze while maintaining versatility to be customised to suit all styles of use!

Whether you use this device in Boro configuration with your favourite bridge/RBA or test the limits of the Stubby with the new Stubby Single Coil RDTA - this single 18650 80W device is sure to tick all the boxes for your next daily device!

Specs:

  • Dimensions: 77 x 43 x 30mm
  • Capacity: 8.7ml
  • Battery: Single 18650 not included
  • Minimum Resistance: 0.08ohms
  • Input Voltage: 3.2 - 4.2V
  • Output Voltage: 0.8 - 8.0V
  • Charging Rate: 1A
  • Boro Tank Compatible (with included adaptor)
  • BB Threaded Flush 510 Top Nut
  • Compatible with Boro Threaded Nuts and Integrated Drip Tips
  • Unique giant Boro - Stubby Single Coil RDTA
  • Stainless Steel Wicking System
  • USB-C Charging
  • Brass Connections For Optimum Resistance Reading
  • Diffused Airflow Intake
  • Wire Free 80 Watt Board (3 year manufacturer-fault warranty on chipset)

What's in the box:

  • 1 x Stubby AIO Mod
  • 1 x Stubby Single Coil RDTA
  • 1 x BB Threaded Flush Nut
  • 1 x 510 Drip Tip
  • 1 x Spares Bag (O-Rings, Gaskets, Grub Screws, Air Flow Pins, SS Rods)
  • 1 x Type-C USB Cable
  • User Manual, Welcome Card
  • Tank and Mod packed in 2 individual boxes.

Note: The Stubby AIO is not a beginner device, it is designed for experienced users.

Always ensure that all connections are clean and free of debris and the battery cog is secured down tightly, as this is a wire free device that depends heavily on complete solid connections. The cog must be tight enough that there is no play in the battery at all.

"No atomizer" errors can be very easily fixed by removing the RTDA or Boro Tank and adapter and adjusting the bottom contact on the device up a quarter turn. This can be accessed by removing the lock nut at the top of the device and putting a screwdriver through the section down to the contact pin and adjusting accordingly.

We recommend builds of 0.3ohm and above to avoid battery sag causing the device to drop wattage. Lower ohm builds may cause the PCB to throttle the wattage down in sets of 5W to 10W, though this will vary slightly with differently rated batteries.

This product does not contain nicotine.

Share this

Pin Post Plus

Similar Products

SOLD OUT
75% off!
Uwell Caliburn Tenet Koko Pod Kit

Uwell Caliburn Tenet Koko Pod Kit

Uwell

$10.00 AUD
Was $39.95 AUD

SOLD OUT
75% off!
Uwell Caliburn Tenet Pod Kit

Uwell Caliburn Tenet Pod Kit

Uwell

$10.00 AUD
Was $39.95 AUD