Invader III 240W Mod



$64.95 AUD  

Hurry! Only 4 left at this price!

  • Invader III 240W Mod
  • Invader III 240W Mod
  • Invader III 240W Mod
  • Invader III 240W Mod
  • Invader III 240W Mod
  • Invader III 240W Mod
  • Invader III 240W Mod

This variant is currently sold out.

The Tesla III isn't just another variable voltage mod- with an upper 45A limit, this is a variable voltage mod for those who want SERIOUS POWAAAA.

While the specifications state a maximum 240W and minimum resistance of 0.1ohm, these specifications are recommendations, as the mod will actually fire slightly lower than 0.1ohm, and will actually output higher wattages with the right ohm/voltage combination.

The Tesla III uses two high-drain 18650s in series (at approx 8.4v), then "bucks" the voltage down to 3.6 - 6.5v, depending on how much power you dial in with the rotatable potentiometer.

The Tesla III is NOT a beginner's device. This device will NOT stop you from doing something silly, like exceeding the amp limits of your batteries.


Anyway, let's carry on. (sorry for yelling)

The potentiometer control knob is for voltage adjustment. No fancy LCD LED OLED screens here. You simply rotate it from I to V to choose the output voltage level. The stated voltage regulation range is "3.6-6.6V"

We've tested this mod with an oscilloscope, and measured the following voltages:

  • I - 3.6V (lower limit)
  • II - 4V
  • III - 4.6V
  • IV - 5.4V
  • V - 6.5V (upper limit)

The tough zinc alloy finish is very rigged, and feels amazing to hold. Whilst smaller than a Sigelei 100W, it has a nice heft to it due to the metal construction.

Final notes;

Three people in the VE warehouse now use the Tesla III, they are very well built. I love mine.
<3 Mo

Manufacturer Specifications:

Material: Zinc Alloy
Dimension: 3.5"(L) x 2"(W) x 0.9"(D)
Battery: 2 x 18650 high drain batteries wired in series (not included, we use and recommend the Samsung 25R)
Input voltage range: 6.6V - 8.4V
Output voltage range: 3.6V - 6.6V (Adjustable)
Max output power: 240W
Max output current: 45A
Min atomizer resistance: 0.1ohm
Spring-loaded 510
Reverse battery protection
Short circuit protection
Over-time vaping warning(the LED flashes when it works continuously more than 10s)
Low-voltage warning
Voltage Adjust Knob
Magnetic Door

When users fire the Tesla Invader III, the blue light will activate. Errors such as low battery voltage, reaching the puff cutoff, or a short-circuit will make the blue light flash.

User Manual can be found here


You must read, understand, and agree to the following before purchasing: This is an advanced piece of hardware that is absolutely not suitable for use by beginners or anyone who doesn't have a thorough and comprehensive understanding of Ohm's law and battery safety. If you're a new vaper and this device was recommended to you by a friend, then that person is a bad friend and you should be suspicious of all of their opinions from now on.

Serious injury and bodily harm can be caused by incorrect use of this device, and Vapoureyes will not be held liable for any issues that arise from improper handling or lack of proper knowledge. It is entirely incumbent on you to research and understand the safe operation of this mechanical mod.

Unlike regulated devices, mechanical mod do not have any internal circuitry to detect improperly oriented batteries, nor do they limit battery discharge or incorporate any safety cutoffs. For that reason, it is vitally important that you take note of and follow the battery orientation marks on the device to avoid shorts, and to only ever use high-drain batteries that are in excellent condition with no bumps or dents, and which are properly wrapped.

This is not a toy, do not be cavalier with your safety. If you have any doubt whatsoever about the level of knowledge required to safely use this device, buy something else. There are plenty of regulated devices capable of producing just as much vapour without any of the risks associated with mechanical devices.

Share this

Pin Post Plus

Similar Products