VCP - Vaperz Cloud "Piglet" Series Mod

FREE EXPRESS SHIPPING

Vaperz Cloud LLC

$194.95 AUD  

Hurry! Only 0 left at this price!

  • VCP - Vaperz Cloud "Piglet" Series Mod
  • VCP - Vaperz Cloud "Piglet" Series Mod
  • VCP - Vaperz Cloud "Piglet" Series Mod
  • VCP - Vaperz Cloud "Piglet" Series Mod

This product is currently sold out.


The VCP, affectionately known as the Piglet, small in size but packing all the punch of a wild boar.

Its dual 18650 battery configured in a series will provides close to 8.4 volts of raw mechanical power! 

This mod is not for new vapers or the faint hearted.
We do not recommend vaping on builds lower than 0.25 ohms.
Flawlessly machined out of a solid block of high grade aluminium with marine grade brass accents that meet seamlessly to create a simplistic beauty few mods achieve.
Don’t let the Piglets compact size fool you its solid copper internals means very low voltage drop so this mod hits hard.
The flush mounted delrin button means there is no need for locking mechanisms and the short effortless throw provides immediately power every time.

Specs:

  • Solid Alloy and brass outer construction
  • Fully mechanical
  • Dual 18650 battery setup in series (8.4 volts!)
  • Full high grade copper contacts
  • Adjustable solid copper 510 pin
  • Flush mounted delrin firing button (no need for locking switch)
  • Flush mounted battery door with clear positive and negative icons for correct battery configuration
You must read, understand, and agree to the following before purchasing-
VE will not be liable for the incorrect use of this device
  • This is an advanced piece of hardware. Proper battery and ohm's law knowledge is critical in using this device.
  • This device runs two batteries in series. Two identical, high-amp, paired and married batteries must be used, and charged simultaneously. Batteries not included.
  • Do not use any tank atomisers with pre-made coils, there are none on the market designed to be run at 8.4v. (Well, actually the Cyclone 0.6ohm coils are rated at 150w, so they might be fine)
  • This device outputs 8.4v on fully charged batteries. The lowest recommended resistance for use on this device is 0.4ohm, in conjunction with high-amperage (20 Amp Continuous) cells.
  • Batteries MUST NOT be placed the same orientation (++ one end, -- the other), as this will short out the device. One cell must be upside down, the other right way up.

Share this

Pin Post Plus

Similar Products

days
hours
minutes
seconds