SMOK TF-RTA

Smoktech

$38.00 AUD  

Hurry! Only 17 left at this price!

Accessories for the SMOK TF-RTA

This variant is currently sold out.


The SMOK TF-RTA is a awesome rebuildable tank atomizer with a 4.5ml capacity, and available in two deck types!

TF-RTA has two editions are available; one with quad-coil G4 deck and the other with dual-post velocity G2 deck.

Specifications:

Size (height x diameter): 65mm x 24.5mm
Capacity: 4.5ml
Material: Glass & Stainless Steel
Threading: 510

What's in the box:

SMOK TF-RTA (G4 edition)

1 x TF-RTA Tank (24.5mm)
1 x TF-RTA G4 Deck (Pre-installed)
1 x Screwdriver for G4 Deck
1 x Replacement Glass tube
1 x SMOK Vape band
1 x User manual
Spare Parts


SMOK TF-RTA (G2 edition)

1 x TF-RTA Tank (24.5mm)
1 x TF-RTA G2 Deck (Pre-installed)
1 x Screwdriver for G2 Deck
1 x Replacement Glass tube
1 x SMOK Vape band
1 x User manual
Spare Parts

HOW TO BUILD THE RTA(G4)
1.Before starting make sure your hands are clean.
2.Taking the TF-RTA G4 deck apart.
3.Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw.
4.Position and cut the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5.Cutting a strip of cotton and make sure it's just larger than the coil you built.
6.Inserting the cotton, and placing it in the middle.
7.Cutting the wick at an angle and make sure it's not too short and not too long.
8.Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

SMOK TF-RTA Tank - 4.5ml, Steel

HOW TO BUILD THE RTA(G2)
1.Before starting make sure your hands are clean.
2.Taking the TF-RTA G2 deck apart.
3.Installing the pre-wrapped coil. Insert one end of your coil into the left-side holes, and the other end into the right-side holes.
4.Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5.Cutting a strip of cotton and make sure it’s just larger than the coil you built.
6.Inserting the cotton, and placing it in the middle.
7.Cutting the wick at an angle and make sure it’s not too short and not too long.
8.Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

SMOK TF-RTA Tank - 4.5ml, Steel

 

SMOK TF-RTA Tank - 4.5ml, Steel

Share this

Pin Post Plus

Similar Products