iJust 2 Mini Kit // 2ml 1100mAh
Hurry! Only 0 left at this price!
The Eleaf iJust 2 Mini Kit is the extremely pocketable version of the iJust 2 Kit.
With a excellent airflow and accepting of any Melo or Atlantis-threaded coils, the iJust 2 mini is a fantastic starter kit with plenty of power.
iJust 2 Mini Tank
Wattage: 30W - 80W
iJust 2 Mini Battery
What's in the box:
1 x iJust 2 Mini Mouthpiece
1 x iJust 2 Mini Atomizer Tube
1 x EC 0.3ohm Head
1 x iJust 2 Mini Atomizer Standard Base
1 x iJust 2 Mini Battery
1 x Airflow Control Ring
1 x USB Cable
1 x User Manual
1. 2ml Atomizer Capacity and 1100mAh Battery
2. Changeable EC head(dual coil)
3. Direct output voltage
4. Spring connector
5. Special heat dissipation structure
6. Direct output voltage
7. Pure organic cotton wick
8. Compact PCB board
9. Airflow Control
How to Use
1. Assembly the atomizer first by connecting the mouthpiece, atomizer tube, atomizer head and atomizer base.
2. Thread atomizer to the battery tightly.
3. Power On/Off: Press the button 5 times in quick succession within 2 seconds. The white indicator light will flash 5 times to show iJust 2 mini is ready for use. By doing the same, turn off the device.
4. Long press the button to take a puff.
5. Charging: Charge iJust 2 mini by connecting it with wall adapter or computer via USB cable. The indicator light will be red when taking a charge. Once fully charged, indicator light will go out.
Note: It will take three hours to get a full charge via 1A wall adapter.
Atomizer Protection: When vaping time exceeds 10 seconds, iJust 2 mini battery will shut off automatically with white indicator light flashing 10 times.
Short-circuit Protection: When the resistance is less than 0.15ohm, short-circuit occurs with the white indicator light flashing 3 times.
Low-voltage Protection: When the voltage of battery is below 3.3V, the white indicator light will flash 40 times. At the same time, pressing power button cannot turn on.
Unlock the Low-voltage Protection: Charge the battery till voltage is above 3.7V. Then the low-voltage protection will be unlocked automatically.
How to Fill
1. Screw the base off the atomizer.
2. Use the syringe or dropper to fill less than 2ml e-liquid. Do not overfill it.
3. Screw the base back on to the atomizer again.