eGo One CLR-Ti Coils - Temp Sensing - 5 Pack

Joyetech

$17.95 AUD  

Hurry! Only 0 left at this price!

This product is currently sold out.


The CLR-Ti coil is a rebuildable eGo One Coil pre-installed with Titanium heating wire, for temperature-sensing devices and allows users to conveniently replace the cotton and customize the coil resistance to their preference.


Warning: Subohm coils require high-amperage batteries - please ensure your mod is capable of firing coils below 0.15ohm before purchasing and using these coils. The coils are only to be used with TEMPERATURE SENSING DEVICES, such as mods with the DNA40, SX350j chip.


Configuration:
1*CLR Head (without coil)
1*Ti (Titanium) Heating Wire
1*Cotton
1*CLR-Ti 0.5ohm coil
Parameter & Recommendation:
Heating Wire ——Ti (Titanium)
Diameter: 0.4mm
Temperature recommended: 450-500˚F
Summit wattage: 60W
Resistance recommended: 0.4Ω—0.6Ω
Rewickable Cotton
The CLR-Ti comes pre-built with
organic cotton. The cotton can
easily be replaced as needed.
Rebuildable and Reuseable
The CLR Atomizer Head is a unique type of RBA. For advanced users, the CLR Atomizer Head can easily be taken apart, so that a new coil can be installed with ease. For standard users, the CLR Atomizer Head can easily be reused when the coils accumulate buildup. Simply remove the cotton, dry burn the coils, let it cool, and then run the coil under cold water. After the coil is dry, new cotton can now be applied to the coil for use.
Cautions: Customers need to choose suitable battery when the heating coil resistance is less than 1ohm.
Liquid Value Control
The Liquid Valve Control can be adjusted according to the PG/VG percentage of the e-juice and voltage output of the battery.

Share this

Pin Post Plus

Similar Products